Canon EOS 1300D - Manual (Page 29)

29
Connecting Automatically with the NFC Function
If necessary, also read “NFC Function Cautions” (p.21).
When touching the smartphone to the camera, be careful not to drop the
camera or smartphone.
Do not touch the smartphone to the camera with too much force. Doing
so can scratch the camera or smartphone.
Just holding the smartphone close to the mark may not establish a
connection. Be sure to touch the mark with the smartphone so that they
come into contact with each other.
Recognition may be difficult depending on the smartphone. Touch slowly
while changing the position or rotating horizontally.
Another application on the smartphone may start depending on how you
touch. Check the position of the p mark, then touch again.
When touching the smartphone to the camera, do not leave anything
between the camera and smartphone. In addition, when a case is
attached to the camera or smartphone, communication may not be
possible via NFC function.
The camera cannot be connected to two or more smartphones at the
same time.
By default, the connection settings via the NFC function are saved as the
fourth setting (a setting dedicated to NFC connection) under the name
[SET4 (NFC)]. When you connect the camera to another smartphone via
NFC, [SET4 (NFC)] will be overwritten.
While connected, the camera’s auto power off does not function.