Canon EOS 1300D - Manual (Page 64)

64
The camera can reconnect to a printer for which connection settings
have been registered.
1
Select [Wi-Fi function].
Under the [53] tab, set [Wi-Fi/NFC]
to [Enable], then select [Wi-Fi
function].
2
Select [l].
Select [l] (Print from Wi-Fi printer)
and press <0>.
3
Select [Connect].
When settings for multiple connection
destinations are registered, select
[Choose set.], select the connection
destination, then connect to the
destination.
Select [Connect] and press <0>.
On the confirmation dialog, select [OK].
X The camera can reconnect to a printer.
If the printer’s connection destination
has been changed, restore the setting
to connect to the camera before
performing this operation.
Reconnecting
If you do not know the SSID of the camera when reconnecting, select
[Review/change settings] in step 3 to check it (p.113).
When connected by selecting [Easy connection] in camera access
point mode, “_Canon0A” is appended to the SSID of the camera.