Canon PowerShot G7 X Mark II - Manual (Page 54)

54
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Changing the Image Display Style after Shots
Still Images Movies
You can change how long images are displayed after shots.
z Press the [ ] button, choose
[Image review] on the [ 1] tab, and then
choose the desired option.
z To restore the original setting, repeat this
process but choose [2 sec.].
2 sec.,
4 sec.,
8 sec.
Displays images for the specified time. Even while the
shot is displayed, you can take another shot by pressing
the shutter button halfway again.
Hold
Displays images until you press the shutter button
halfway.
Off No image display after shots.
● By pressing the [ ] button while an image is displayed after
shooting, you can switch the display information.
Preventing the Red-Eye Reduction Lamp from
Lighting Up
Still Images Movies
You can deactivate the red-eye reduction lamp that lights up to reduce
red-eye when the flash is used in low-light shots.
1
Access the [Flash Settings] screen.
z Press the [ ] button, choose [Flash
Settings] on the [ 5] tab, and then press
the [ ] button.
2
Configure the setting.
z Choose [Red-Eye Lamp], and then
choose [Off].
z To restore the original setting, repeat this
process but choose [On].