Canon PowerShot G7 X Mark II - Manual (Page 23)

23
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Advanced Guide
Basic Guide
Recording Movies
1) Start recording.
z Press the movie button. The camera
beeps once as recording begins, and
[ Rec] is displayed with the elapsed
time (1).
z Black bars are displayed on the top and
bottom edges of the screen, and the
subject is slightly enlarged. The black
bars indicate image areas not recorded.
z Frames displayed around any detected
faces indicate that they are in focus.
z Once recording begins, take your finger
off the movie button.
2) Finish recording.
z Press the movie button again to stop
recording. The camera beeps twice as
recording stops.
(1)
4
Shoot.
Shooting Still Images
1) Focus.
z Press the shutter button lightly, halfway
down. The camera beeps twice after
focusing, and frames are displayed to
indicate image areas in focus.
z If [Raise the flash] is displayed, move
the [ ] switch to raise the flash. It will fire
when shooting. If you prefer not to use
the flash, push it down with your finger,
into the camera.
2) Shoot.
z Press the shutter button all the way
down.
z As the camera shoots, a shutter sound
is played, and in low-light conditions
when you have raised the flash, it fires
automatically.
z Keep the camera still until the shutter
sound ends.
z After displaying your shot, the camera will
revert to the shooting screen.