Canon PowerShot G7 X Mark II - Manual (Page 104)

104
Playback Mode
Wi-Fi Functions
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Customization for Shooting Styles
Changing Control Ring Settings
Still Images Movies
Reassign control ring functions as follows. Using the control ring is an
enjoyable way to control the camera as you would a fully manual camera.
1
Choose a function to assign to the
[ ] ring.
z Press the [ ] button.
z Choose an option, either by pressing the
[ ] or [ ][ ] buttons or by turning the
[ ] ring or [ ] dial.
z Press the [ ] button to complete the
setting.
2
Configure the assigned function.
z Turn the [ ] ring or the [ ] dial to
configure the assigned function.
● You can also configure this setting by pressing the [ ] button,
touching an option to choose it, and then touching it again.
● With the ISO speed in [AUTO] mode, you can also adjust the
exposure before recording by turning the exposure compensation
dial.
● When the ISO speed is fixed, an exposure level mark based on
your specified value is shown on the exposure level indicator for
comparison to the standard exposure level. The exposure level
mark is shown as [ ] or [ ] when the difference from standard
exposure exceeds 3 stops.
● You can check the ISO speed in [AUTO] mode by pressing the
shutter button halfway. If standard exposure cannot be obtained
with your specified shutter speed and aperture value, the ISO
speed is displayed in orange.
● Focus can be adjusted during recording by touching [ ] (to
switch it to [
]) and then pressing the [ ][ ] buttons.