Previous access points – Canon PowerShot G7 X Mark II User Manual
Page 152
152
Setting Menu
Accessories
Appendix
Before Use
Index
Basic Guide
Advanced Guide
Camera Basics
Auto Mode /
Hybrid Auto Mode
Other Shooting Modes
P Mode
Tv, Av, M, and C Mode
Playback Mode
Wi-Fi Functions
Previous Access Points
You can reconnect to any previous access points automatically by
following step 4 in “Using WPS-Compatible Access Points” (= 149).
●
To connect to a device via an access point, confirm that the target
device is already connected to the access point, and then follow the
procedure from step 8 in “Using WPS-Compatible Access Points”
●
To switch access points, choose [Switch Network] on the screen
displayed when you establish a connection, and then either follow
the procedure in “Using WPS-Compatible Access Points” (= 149)
from step 5 or the procedure in “Connecting to Listed Access Points”
3
Enter the access point password.
z
Press the [ ] button to access the
keyboard, and then enter the password
z
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Next], and then press the
[ ] button.
4
Choose [Auto].
z
Press the [ ][ ] buttons or turn the [ ]
dial to choose [Auto], and then press the
[ ] button.
z
To save images to a connected computer,
follow the procedure from step 8 in
“Using WPS-Compatible Access Points”
●
To determine the access point password, check on the access
point itself or refer to the user manual.
●
If no access points are detected even after you choose [Refresh]
in step 2 to update the list, choose [Manual Settings] in step 2
to complete access point settings manually. Follow on-screen
instructions and enter an SSID, security settings, and a password.
●
When you use an access point that you have already connected
to for connecting to another device, [*] is displayed for the
password in step 3. To use the same password, choose [Next]
(either press the [ ][ ] buttons or turn the [ ] dial) and press
the [ ] button.