ProSoft Technology AN-X-MOD - Manual (Page 54)

Page 50 AN-X-MOD (Master) November 2011
Using AnxInit
AnxInit is a 32-bit Windows application supplied with AN-X to perform
the following functions:
• Locate and identify AN-X modules on the Ethernet network
• Select a specific AN-X for configuration
• Set the IP address and other network parameters for an AN-X
• Restart an AN-X in production mode
• Display information about the selected AN-X
• Read the kernel parameters for the selected AN-X
• Update the flash (low level firmware) on the selected AN-X
• Update the firmware on the selected AN-X
• Patch the firmware on the selected AN-X
In addition, it can be used to:
• clear the AnxInit log
• copy the contents of the log to the clipboard for use by another
application. This is often useful for technical support
AnxInit Log
AnxInit logs messages in its main window. These messages are often
useful for determining the cause of errors or for technical support.
To clear the log, select Edit/ClearLog.
To copy the contents of the Log to the Windows clipboard so that they
can be pasted into another application, select Edit/Copy.