ProSoft Technology MVI56E-SIE - Manual (Page 92)

Configuring the MVI56E-SIE Module MVI56E-SIE ♦ ControlLogix Platform
User Manual Client Communication Module
Page 92 of 168 ProSoft Technology, Inc.
September 6, 2012
2 In the Download dialog box, click B ROWSE D EVICE ( S ) to open ProSoft
Discovery Service.
3 Select the module, and then click the right mouse button to open a shortcut
menu. On the shortcut menu, choose S ELECT FOR PCB.
4 Close ProSoft Discovery Service.
5 Click D
OWNLOAD to transfer the configuration to the module.
2.4.1 Using CIPconnect to Connect to the Module
CIPconnect ® can be used to connect a PC to the MVI56E-SIE module over
Ethernet using Rockwell Automation’s 1756-ENBT EtherNet/IP ® module. This
allows for configuringof the MVI56E-SIE module and network, uploading and
downloading of files, and viewing of network and module diagnostics from a PC.
RSLinx is not required when using CIPconnect. All that is needed:
 The IP addresses and slot numbers of any 1756-ENBT modules in the path
 The ControlNet node numbers and slot numbers of any 1756-CNBx
ControlNet Bridge modules in the path
 The slot number of the MVI56E-SIE in the destination ControlLogix chassis
(the last ENBT/CNBx and chassis in the path).