ProSoft Technology MVI56E-SIE - Manual (Page 35)

MVI56E-SIE ♦ ControlLogix Platform Start Here
Client Communication Module User Manual
ProSoft Technology, Inc. Page 35 of 168
September 6, 2012
1.8 Connecting Your PC to the ControlLogix Processor
There are several ways to establish communication between your PC and the
ControlLogix processor. The following steps show how to establish
communication through the serial interface. It is not mandatory to use the
processor's serial interface. The processor may be accessed through whatever
network interface is available on the system. Refer to theRockwell Automation
documentation for information on other connection methods.
1 Connect the right-angle connector end of the cable to the controller at the
communications port.
2 Connect the straight connector end of the cable to the serial port on the
computer.