Epson AcuLaser C3000 - Manual (Page 44)

44 Paper Handling
R4CE640
long.bk
Rev. E
A5 size PAPER.FM
6/10/04
L Proof Sign-off:
ABE J.Hashimoto, K.Iwamura
M.Ishigami
S. Halvorson
The following table shows important settings you have to make
when using labels.
Note:
❏ You should only use labels designed for monochrome laser printers
or monochrome plain-paper copiers.
❏ To prevent the label adhesive from coming into contact with printer
parts, always use labels that completely cover the backing sheet, with
no gaps between the individual labels.
❏ Press a sheet of paper on top of each sheet of labels. If the paper sticks,
do not use those labels in your printer.
❏ You may have to make the setting Thick* for Paper Type in the
Setup Menu.
* When using especially thick labels, set Paper Type to ExtraThk.
Paper Source MP tray (up to 10 mm thickness)
MP Tray Size setting in the Tray
Menu
A4 or LT
Printer driver settings Paper Size: A4, LT
Paper Source: MP Tray
Paper Type: Labels