Epson AcuLaser C3000 - Manual (Page 259)

Troubleshooting 259
R4CE640
long.bk
Rev. E
A5 size TROUB.FM
6/10/04
R Proof Sign-off:
ABE J.Hashimoto, K.Iwamura
M.Ishigami
S. Halvorson
9
9
9
9
9
9
9
9
9
9
9
9
❏ We recommend canceling all printing job by pressing the Cancel Job
button for more than 2 seconds because canceling just the job that
caused the error may result defects in the next printing job.
Invalid N/W Module
There is no network program, or the network program cannot be
used with the AcuLaser C3000. Update the program.
Jam XXX
The location where the paper jam occurred is displayed at xxx.
xxx
indicates the location of the error.
If a paper jam occurs at two or more locations simultaneously, the
corresponding multiple locations are displayed.
Location Description
Jam AB Paper is jammed at the fuser unit. For instructions on how to
remove jammed paper at the fuser unit, see “Jam AB (covers
A and B)” on page 212.
Jam A Paper is jammed at cover A. For instructions on how to
remove jammed paper at cover A, see “Jam A (cover A)”
on page 214.
Jam AC Paper is jammed where it feeds into the printer, or at the
paper cassettes. For instructions on clearing this type of paper
jam, see “Jam AC (cover A and paper cassettes)” on page
219.
Jam B Paper is jammed inside the duplex unit. For instructions on
clearing this type of paper jam, see “Jam B (cover B)” on
page 223.
Jam ABC Paper is jammed where it feeds into the printer or at the paper
cassettes, and inside the duplex unit. For instructions on
clearing this type of paper jam, see “Jam ABC (cover A,
paper cassettes and cover B)” on page 225.