Epson AcuLaser C3000 - Manual (Page 229)

Troubleshooting 229
R4CE640
long.bk
Rev. E
A5 size TROUB.FM
6/10/04
R Proof Sign-off:
ABE J.Hashimoto, K.Iwamura
M.Ishigami
S. Halvorson
9
9
9
9
9
9
9
9
9
9
9
9
Operational Problems
The Ready light does not turn on
The printer does not print (Ready light off)
The Ready light is on but nothing prints
Cause What to do
The power cord may not be
properly plugged into the
electrical outlet. Turn off the printer and check the
power cord connections between the
printer and the electrical outlet. Then
turn the printer back on.
The electrical outlet may be
controlled by an outside
switch or an automatic timer. Make sure that the switch is turned on
or plug another electrical device into the
outlet to check whether the outlet is
operating properly.
Cause What to do
The printer is offline. Press the N Start/Stop button once to
switch the printer to ready status.
Cause What to do
Your computer may not be
properly connected to the
printer. Perform the procedure described in
“Connecting the Printer to a Computer”
in the Setup Guide.