Epson AcuLaser C3000 - Manual (Page 238)

238 Troubleshooting
R4CE640
long.bk
Rev. E
A5 size TROUB.FM
6/10/04
L Proof Sign-off:
ABE J.Hashimoto, K.Iwamura
M.Ishigami
S. Halvorson
Toner smudges
There may be no toner left in
the toner cartridge. If the message on the LCD panel or in
EPSON Status Monitor 3 indicates that
the amount of toner is low, see
“Replacing a toner cartridge” on page
182.
The gradation setting is too
small when printing graphics. On the Basic Setting menu in the printer
driver, click More Settings and adjust
the Contrast.
There may be a problem with
the photoconductor unit. Replace the photoconductor unit. See
“Photoconductor Unit” on page 187.
Cause What to do
Your paper may be moist or
damp. Do not store your paper in a humid or
damp environment.
You may not be using the
correct type of paper for your
printer. EPSON special paper or smooth,
high-quality copier paper is
recommended for best results. See
“Available paper types” on page 272 for
information on choosing paper.
The paper path inside the
printer may be dusty. Turn off the printer. Clean internal
printer components by printing three
pages with only one character per page.
There may be a problem with
the photoconductor unit. Replace the photoconductor unit. See
“Photoconductor Unit” on page 187.