Epson AcuLaser C3000 - Manual (Page 141)

Setting Up Your Printer on a Network 141
R4CE640
long.bk
Rev. E
A5 size SETUP.FM
6/10/04
R Proof Sign-off:
ABE J.Hashimoto, K.Iwamura
M.Ishigami
S. Halvorson
5
5
5
5
5
5
5
5
5
5
5
5
❏ If the printer driver is installed in the client beforehand, you
need to select the new printer driver or the current printer
driver. When the prompt to select the printer driver appears,
select the printer driver according to the message.
❏ If the additional driver for Windows NT 4.0 is installed in the
Windows XP, 2000, or Server 2003 printer server, go to the
next step.
❏ If the additional driver for Windows NT 4.0 is not installed in
the Windows XP, 2000, or Server 2003 printer server or the
printer server’s OS is Windows Me, 98, or 95, go to “Installing
the printer driver from the CD-ROM” on page 141.
5. Select whether to use the printer as the default printer or not,
then click Next.
6. Click Finish.
Installing the printer driver from the CD-ROM
This section describes how to install the printer driver in the
clients when setting the network system as follows:
❏ The additional drivers are not installed in the Windows XP,
2000, NT 4.0, or Server 2003 printer server.
❏ The printer server’s OS is the Windows Me, 98, or 95 and the
client’s OS is the Windows XP, 2000, or NT 4.0.
The on-screen displays on the following pages may differ
depending on the version of Windows OS.
Note:
❏ When installing in Windows XP, 2000, or NT 4.0 clients, you must
access Windows XP, 2000, or NT 4.0 with the Administrator.