Epson AcuLaser C3000 - Manual (Page 261)

Troubleshooting 261
R4CE640
long.bk
Rev. E
A5 size TROUB.FM
6/10/04
R Proof Sign-off:
ABE J.Hashimoto, K.Iwamura
M.Ishigami
S. Halvorson
9
9
9
9
9
9
9
9
9
9
9
9
Optional RAM Error
The optional memory module may be corrupted or incorrect.
Replace it with a new one.
Paper Out XXXXX YYYY
There is no paper in the specified paper source (XXXXX). Load
paper of the size (YYYY) into the paper source.
Paper Set XXXXX YYYY
The paper loaded in the specified paper source (XXXXX) does not
match the required paper size (YYYY). Replace the loaded paper
with the correct size paper and press the N Start/Stop button to
resume printing. Or press the q Cancel Job button to cancel the
print job.
If you press the N Start/Stop button without replacing the paper,
the printer will print on the loaded paper even though it does not
match the required size.
Printer Open
Cover A, cover B, cover D, or some combination of these covers
are open. To clear this error, close all covers.
Print Overrun
The required time to process the print data exceeded the print
engine speed because the current page is too complex. Press the
N
Start/Stop button to resume printing. Or press the q Cancel Job
button to cancel the print job. If this message appears again, select
On
as the Page Protect setting in the control panel’s Setup Menu.
If you continue to receive this message when printing a particular
page, try simplifying the page by limiting the number of graphics
or reducing the number and size of fonts.