Epson AcuLaser C3000 - Manual (Page 110)

110 Using the Printer Software with Macintosh
R4CE640
long.bk
Rev. E
A5 size DMNH.FM
6/10/04
L Proof Sign-off:
ABE J.Hashimoto, K.Iwamura
M.Ishigami
S. Halvorson
Note:
To remove the saved watermark, select it from the List box, then click
Delete. After removing it, be sure to click Save to close the dialog
box.
6. Select the saved custom watermark from the Watermark
drop-down list on the Layout dialog box, then click OK.
Printing with the duplex unit
Duplex printing prints on both sides of the paper. When printing
for binding, the binding edge can be specified as required to
produce the desired page order.
As an E NERGY S TAR
®
partner, Epson recommends the use of
the double-sided printing function. Refer to E NERGY S TAR
®
Compliance for more information on the E NERGY S TAR
®
program.
1. Click the Layout icon on the Basic Settings dialog box. The
Layout dialog box appears.
2. Select the Duplex check box.
3. Select a Binding position from Left, Top, or Right.
4. Click Duplex Settings to open the Duplex Settings dialog box.