PLANET NAS-7450 - Manual (Page 6)

6
HDD Access LED HDD ready LED Description
Red on during
access
Green Blinks Power is being accessed
Red on Green Blinks (FAST)
RAID building, rebuilding,
expending
Off Amber on
Volume un-mounted and HDD is
ready for being hot-unplugged
Off Amber Blink (Slowly)
Disk fault Blinking interval is 2
second
Off Off
Hard disk is absent or SATA
cable is not connected
NAS-7850 Rear View
Power Jack
e-SATA
RS-232
LAN Jack
USB
PCI-E
Interface Description
Power Jack
Connect the two power supply cord shipped with the
system
e-SATA Connect to External hard drive case
RS-232 Connect to UPS
LAN Jack (LAN1)
These RJ-45 ports support auto negotiating Fast Ethernet
10/100/1000 Base-TX networks. That allows your system
to be connected to an Internet Access device, e.g.
router, cable modem, ADSL modem, through a CAT.5
twisted pair Ethernet cable.
LAN Jack (LAN2)
USB Socket Connect to UPS and external HDD(FAT/FAT32)
PCI-E Port (optional) Connect to Tape Backup or Tape Library or Network card