PLANET NAS-7450 - Manual (Page 10)

10
3. Now install the center slide to the rack-mount chassis. Find the screw holes on
both sides of the rack-mount chassis, which are used for mounting the center
slide. Fasten the “#6-32” screws to fix the center slides onto chassis. Later, the
center slides will be used for attaching to the sliding rail.
4.Next, attach the two L-shaped mounting brackets on to a sliding rail. Use the
“M4” screws to secure the L-shaped bracket on to the sliding rail.
5. Attach the sliding rail onto a rack-mount cabinet. Secure the sliding rail onto the
rack-mount cabinet via the screw holes on the L-shaped brackets
After properly attaching both sliding rails to the rack-mount cabinet, you may slide
the rack-mount chassis (mounting) in to the cabinet.