PLANET NAS-7450 - Manual (Page 16)

16
3.2. HDD Formation and RAID Setting
For new attached hard disk, you should format the HDD before any setting.
1. Go to [Volume]  [Create] to configure the server “Volume Name” and
“Volume Type”.
2. Please press the Volume Type scroll to make RAID after selected Free Disk,
and check “Apply”, then it will be automatically format.
3. After format completed, you can then start to access the storage of the RAID
NAS server accordingly.
Further Information
This guide is used to help you startup your NAS-7450 / NAS-7850 settings. It
is also recommended to check the user manual CD-ROM for more details of the
system and user configuration.