PLANET IKVM-8000 - Manual (Page 49)

pointer is moved by one pixel. This option only works when the
mouse settings on the host are linear. This means that there is
no mouse acceleration involved.
To set the options, click on the button “Apply”.
5.4.3 Video
• Noise filter
This option defines how the IKVM-8000 reacts to small changes in the
video input signal. A large filter setting needs less network traffic and
leads to a faster video display, but small changes in some display
regions may not be recognized immediately. A small filter displays all
changes instantly but may lead to a constant amount of network traffic
even if the display content is not really changing (depending on the
quality of the video input signal). All in all the default setting should be
suitable for most situations.
• Force Composite Sync (Required for Sun Computers)
To support signal transmission from a Sun machine, enable this option.
If not enabled the picture of the remote console will not be visible.
To set the options, click on the button “Apply”.
5.5 Device Settings
5.5.1 Network
The Network Settings panel allows changing network related parameters. Each
parameter will be explained below. Once applied the new network settings will
immediately come into effect.
44