PLANET IKVM-8000 - Manual (Page 43)

Select a user from “Existing users” list, then click “Delete” button. The specified
user will be removed from the list immediately.
5.4 KVM Settings
5.4.1 User Console
The following settings are user specific. That means, the super user can customize
these settings for every users separately. Changing the settings for one user does
not affect the settings for the other users.
User select box
This selection box displays the user ID for which the values are shown and for
which the changes will take effect. You may change the settings of other users
if you have the necessary access rights.
Transmission Encoding
The Transmission Encoding setting allows changing the image-encoding algo-
rithm that is used to transmit the video data to the Remote Console window. It is
possible to optimize the speed of the remote screen depending on the number
of users working at the same time and the bandwidth of the connection line
(Modem, ISDN, DSL, LAN, etc.).
Automatic detection
The encoding and the compression level is determined
automatically from the available bandwidth and the current
content of the video image.
38