Reset button, Reboot the print server, Perform a factory default – PLANET FPS-3300 User Manual

Page 67: Eboot the, Rint server, Erform a, Actory, Efault

Text mode
Original mode

Reset Button

Reboot the Print server:

1. Verify the power of print server is turned on.
2. Press the reset button once, and then release it.

WARNING: This will restart the print server and stop all on-going and pending print jobs!

Perform a Factory Default

1. Disconnect the external power adapter.

2. Hold down the reset button.

3. Reconnect the external reset button. Wait about 5~6 seconds.

4. Release the reset button.

5. The print server will restart.

WARNING: This will erase all settings of print server to default and should be performed with caution!

After performing a factory default, the default settings will be:

DHCP client: off

IP address: 192.168.0.10

Subnet Mask: 255.255.255.0

Reset Button

LINK

POWER