PLANET FPS-3300 - Manual (Page 52)

1. Make sure that the TCP/IP is well configured on your RedHat system, including network interface
card's driver and IP-related settings say, IP address, subnet mask, and gateway IP).
2. Log in root.
3. Assign Print Server an IP address. At shell mode:
c.1. arp -s < Print Server 's Node ID>
c.2. Execute tftp < Print Server 's IP> get config.txt and quit tftp.
c.3. Edit the config.txt and modify the IP address, subnet mask, and gateway IP. When done, save
the config.txt.
c.4. Execute tftp put config.txt and quit tftp.
4. Start X-windows by typing startx at the shell mode.
5. Open Printer Configuration.
6. Click New button.
7. Click Forward button.
52