PLANET FPS-3300 - Manual (Page 37)

Function Description
DHCP/BOOTP
This option allows you to select DHCP/ BOOTP option. If there is a DHCP/BOOTP
server on your network. This option allows the print server to obtain IP-related settings
automatically from your DHCP server.
IP Address
This option allows you to input IP address from the print server. The IP address must
meet the IP addressing requirements of the network segment.
Note:
In the TCP/IP Setup screen, specify a fixed IP address is highly recommended.
Subnet Mask
This option allows you to input subnet mask from the print server. The IP address must
meet the IP addressing requirements of the network segment.
Gateway
This option allows you to input gateway from the print server. This IP address of
gateway must meet the router or gateway to go across of the network segment.
6.2.4 NetWare
Setup
37