PLANET FPS-3300 - Manual (Page 16)

4. In the Subnet Mask option, type the Subnet Mask your LAN or network segment is currently configured to
use.
5. (Optional) In the Gateway field, type the IP address of gateway.
6. When done, click OK button. The program will save the above settings into the print server.
4.1.2 NetWare Wizard
1. Log into your NetWare file server as a Supervisor (Admin.) or equivalent.
2. Select TCP/IP Wizard in Configuration Wizard screen and click “Next”.
3. Select the NetWare File Server to which the print server device will be attached.
4. Type in a Print server.
5. Type in a Print Queue Names.
Note: Each print queue corresponds to each print port of the print server.
6. Click “OK”.
7. From your NetWare client computer, such as Windows 95/98/Me, create a printer that is connected
(redirected) to one of the NetWare print queues serviced by the print server.
16