PLANET FPS-3300 - Manual (Page 41)

In the print server's SNMP implementation, the following MIB objects are available for updating.
MIB Object Names
Description
system.sysContact Indicates the network administrator's name.
system.sysName Indicates the print server's name for identification.
system.sysLocation Indicates the location of the print server.
snmp.snmpEnableAuthenTraps
Enables or disables the function of sending SNMP Authentication Failure trap message to the network
administrator, if the community name within a SNMP request is not correct.
Users can set up print server’s SNMP functions by using their browsers.
Function
Description
SNMP Community
The print server supports up to two community names. The default community name is
public (case-sensitive), with Read Only access right in default.
Support HP
WebJetAdmin
This option allows user determine to disable/enable the Support HP WebJetAdmin.
SNMP Traps
Enable the function of sending SNMP Authentication Failure trap message to the
network administrator, if the community name within a SNMP request is not correct.
41