PLANET FPS-3300 - Manual (Page 15)

4.1.1 TCP/IP Wizard
1. Select TCP/IP Wizard in Configuration Wizard screen and click “Next”.
2. Select “Obtain an IP address from DHCP server”. If there is a DHCP server on your network. This
option allows the print server to obtain IP-related settings automatically from your DHCP server. This
setting, by default, is disabled. If you would like to manually specify an IP address to the device, please
skip to the following step.
3. In the IP Address option, type an IP address for the print server. The IP address must meet the IP
addressing requirements of the network segment.
15