PLANET FRT-401 - Manual (Page 58)

58
In-band and out-band Loop back
This function provides TS-1000 Loop Back Test of Fiber devices. Press the “Apply” button
to run Loop Back Test and see the TS-1000 Loop Back Test Result of Fiber Route. The
below screen and Table describes the TS-1000 Loop Back Test object of Managed Media
Converter.
Figure Remote TS-1000 Loop Back Test Web Page screen
The TS-1000 Loop Back Test Web page includes the following configurable data:
TS-1000 Loop Back Test
Send Packet
Number Allow input the number for packet send and the available
options is 1 to 255. Default is 16.
Apply button Press this button for save current configuration of Fiber Router.
TS-1000 Loop Back Test Result
Result Display the TS-1000 Loop Back Test Result. Fail or Pass.
Result counter Display the value of Counter Result.
Table Descriptions of the TS-1000 Loop Back Test Web Page Screen Objects
#
Notice:
The TS-1000 OAM function must work with manageable device
that supports TS-1000 OAM function.