PLANET FRT-401 - Manual (Page 35)

35
3.3 Wireless Setting (For FRT-401N / 401NS15 / 405N)
3.3.1 Basic
You can configure the minimum number of wireless settings for communication, such as
network name (SSID) and channel.
Wireless Network
Radio On/Off:
Enable or disable the wireless LAN.
Network Mode:
There are 6 modes: 11b only, 11g only, 11n only, 11b/g mixed, and
11b/g/n mixed mode.
Network Name (SSID): The service set identification (SSID) is a unique name to
identify the router in the wireless LAN. Wireless stations associating to the router
must have the same SSID. Enter a descriptive name. Its length is up to 32 characters.
Multiple SSID 1/2/3/4/5:
There are 5 multiple SSIDs. Enter their descriptive names
that you want to use.
Broadcast Network Name (SSID):
Select Enable to allow the SSID broadcast on
the network, so that the STA can find it. Otherwise, the STA can not find it.
AP Isolation: Enable or disable AP Isolation. When many clients connect to the same
access point, they can access each other. If you want to disable the access between
clients which connect the same access point, you can enable this function.
MBSSID AP Isolation:
Enable or disable MBSSID AP Isolation.
BSSID:
Basic Service Set Identifier. This is the assigned MAC address of the station
in the access point. This unique identifier is in Hex format and can only be edited
when Multi BSSID is enabled in the previous screen.