PLANET FRT-401 - Manual (Page 31)

31
3.2.2 LAN
This page allows you may enable or disable networking functions and configure their
parameters according to your practice.
IP Address: Enter the IP address of LAN port.
Subnet mask: Enter the subnet mask of LAN port.
LAN2:
The second IP switch of LAN port. You can enable or disable this function.
LAN2 IP Address:
The second IP address of LAN port.
LAN2 Subnet Mask:
The second IP Subnet Mask of LAN port.
MAC Address:
MAC address of LAN port (Read-only).
DHCP Type: You can select Server or Disable. If you select Disable, the DHCP
service of LAN port is disabled. After selecting Server, you can set the following items.
Start IP Address:
The first IP address that DHCP server assigns.
End IP Address:
The last IP address that DHCP server assigns.
Subnet Mask:
The subnet mask of dynamic IP.