PLANET FRT-401 - Manual (Page 40)

40
WEP:
Disable or enable WEP.
Radius Server
IP Address: Enter the IP address of Radius Server.
Port:
The default port of the RADIUS server for authentication is 1812. You need not
change this value unless your network administrator instructs you to do so with
additional information.
Shared Secret:
Enter a password as the key to be shared between the external
authentication server and the access point. The key is not send over the network.
This key must be the same on the external authentication server and your router.
Session Timeout: Set the time interval for session. Enter the proper value in the
field.
Idle Timeout:
Set the idle time interval. Enter the proper value in the field.
Access Policy
Policy: There are three options, including Disable, Allow, and Reject. You can choose
Disable, Allow or Reject. Select Allow, only the clients whose MAC address is listed
can access the router. Select Reject, the clients whose MAC address is listed are
denied to access the router.
Add a station MAC: If you want to add a station MAC, enter the MAC address of the
wireless station that are allowed or denied access to your router in this address field.
After finishing the settings above, click Apply to save the settings and make the new
configuration take effect. Click Cancel to close without saving.