PLANET BM-2101 - Manual (Page 47)

Connect Mode
„ The WAN network connection mode can be divided into :
‹ PPPoE ADSL user
‹ Dynamic IP Address (cable modem user)
‹ Static IP address (static connection or ADSL static line users )
Saturated Connections
„ Can set the WAN connections depend on the traffic , connections and packets.
Priority
„ Set the WAN interface priority by balance mode choice.
Service
„ To test if the WAN can work or not. The testing includes two parts
‹ ICMPPing the IP to see if the connection can work.
‹ DNS Use the domain name to see if the connection can work.
Downstream Bandwidth and Upstream Bandwidth
„ Can set the proper bandwdith of the WAN interface.
The Idle Time
„ As the WAN interface set to be the PPPoE (ADSL users ) settings, the MIS
engineer can set the idle time when the WAN port is not in use. (Its unit is minute)