PLANET BM-2101 - Manual (Page 19)

Dynamic Routing (RIPv2)
„ By enable LAN, WAN or DMZ Port to send and receive RIPv2 packets, the BM-
2101 appliance can communicate with internal or external routers and dynamically
update the route table. ( The MIS engineer can set up routing information update
timer and routing information timeout when it stopp to receive the RIPv2 packets
and the router will automatically cancel the dynamic routing table according to the
setting.)
Administration Packet Logging
„ After enabled this function, the system will record the source or destination packet
information of BM-2101 in Monitor Æ Log Æ Traffic for the MIS engineer to
query.
Date / Time
Synchronize System Clock
„ Synchronize the BM-2101 appliance time to the MIS engineer’s PC or the external
time server.
GMT
„ International Standard Time (Greenwich Mean Time)
Multiple Subnet
WAN Interface IP
„ The WAN interface IP which a multiple subnet corresponds to.
Forwarding Mode
„ To indicate the multiple subnet use NAT or Routing mode.
Interface
„ To indicate the multiple subnet interface is LAN or DMZ interface.