PLANET BM-2101 - Manual (Page 271)

20.1 Interface
Step1 Status Æ Interface , it shows all the interface information in BM-2101.
„ System UptimeThe operating uptime of BM-2101.
„ Active Sessions NumberIt shows the real se ssions pass through BM-
2101.
„ MAC AddressThe MAC address of interface.
„ IP Address/Netmask The IP address and netmask of interface.
„ Rx Pkts , Err.PktsIt shows the received pack ets and error packets of
interface.
„ Tx Pkts , Err.PktsIt shows the transferred packets and error packets.
„ Ping , HTTP , HTTPSIt shows if the user can ping the BM-2101
interface , or enter the Web UI through HTTP and HTTPS.
„ Forwarding ModeIt shows the interface connection mode.
„ WAN ConnectionIt shows the WAN interface connection status.
„ DnS / UpS kbpsIt shows the maximium downstream / upstream
bandwidth in WAN . ( MIS engineer can set the max downstream /
upstream bandwidth in Interface)
„ DnStream Alloca.The BM-2101 can allo cate the downstream
percentage depends on the WAN interface network flow.
„ UpStream Alloca.The BM-2101 can allocate the upstream
percentage depends on the WAN interface network flow.
„ PPPoE Con.TimeWhen using the PPPoE connection , it will shows
the connection uptime.
„ Default GatewayIt shows the WAN gateway address.
„ DNS 1It means the DNS 1 server IP address applied from the ISP.
„ DNS 2It means the DNS 2 server IP address applied from the ISP.