PLANET BM-2101 - Manual (Page 264)

18.2 Traceroute
Step1. In Diagnostic Æ Traceroute, the MIS engineer can set the BM-2101 send
the packets to specific address by traceroute command, to detects the status
of WAN interface
„ Enter the Destination IP / Domain name.
„ Enter the Packet size.( Default setting is 40 Bytes )
„ Enter the MAX Time-to-Live.( Default setting is 30 Hops)
„ Enter the Wait time.( Default setting is 2 seconds)
„ Select the source packets Interface.
„ Click OK.
Traceroute setting