PLANET BM-2101 - Manual (Page 179)

Step4. In Virtual Server Æ Server 1 , add the new following settings
„ Virtual Server Real IP Æ click here to configure .
„ Virtual Server Real IP, enter 61.11.11.12 Or click Assist to select .
„ Click OK .
„ Click New Entry .
„ Service , select (Custom Service)VoIP_Service .
„ External Service Port , auto set From-Service(Custom).
„ Load Balance Server 1 , enter 192.168.1.100.
„ Click OK .
„ Complete the virtual server setting
The virtual server real IP setting
The virtual server setting
If the Custom Service only use single port the MIS engineer can modify the external port in
Virtul Server Contrarily , when the Custom Service use more than one port , the MIS engineer can
not modify the external service port in Virtual Server .