PLANET ADN-4100 - Manual (Page 85)

This page displays the information of existing static routes. Click Add and the
page as shown in the following figure appears:
The following table describes the parameters in this page.
Field Description
Destination Network
Address
The destination IP address of the device.
Subnet Mask The subnet mask of the destination IP address.
Use Gateway IP
Address
The gateway IP address of the device.
Use Interface
Select the interface of the static routing used by the
device from the drop-down list.
Note: You can enter the gateway IP address of the device in the Use
Gateway IP Address field or set the User Interface, but cannot apply the two
settings at the same time.
3.3.11.2 Policy Route
Choose Advanced > Routing and click Policy Route. Click Add and the page
as shown in the following figure appears:
76