PLANET ADN-4100 - Manual (Page 28)

19
In this page, you can configure the parameters of wireless LAN clients that may
connect to the device.
The following table describes the parameters in this page.
Field Description
Enable Wireless
Select or deselect the check box to enable or disable
the wireless function.
Enable MultiAP
Isolation
Select or deselect the check box to enable or disable
multiAP isolation. If this function is enabled, clients of
different SSIDs cannot access each other.
Wireless Network
Name (SSID)
Network name. It can contain up to 32 characters. It
can consist of letters, numerals, and/or underlines.
Visibility Status
 Visible indicates that the device broadcasts the
SSID.
 Invisible indicates that the device does not
broadcast the SSID.
Channel Standard
You can select from the drop-down list: FCC(1-11),
ETS(1-13), JP(1-14)
Control Sideband You can select Upper or Lower from the list