PLANET ADN-4100 - Manual (Page 49)

You can use one of the following there methods to use WPS authentication:
 Press the WPS button on the side panel for 3 seconds.
 In the WIRELESS WPS page, click PBC. It has the same function of the
WPS button on the side panel. This is an optional method on wireless
clients.
Note:
You need a Registrar when using the PBC method in a special case in
which the PIN is all zeros.
3.3.1.5 WDS Settings
In the ADVANCED WIRELESS page, click WDS Settings. The WIRELESS
WDS page as shown in the following figure appears:
The Wireless repeater function can make the WLAN signal cover more area. Fill
the blanks and then Apply.
3.3.2 Port Forwarding
This function is used to open ports in your device and re-direct data through
these ports to a single PC in your network (WAN-to-LAN traffic). It allows remote
users to access services in your LAN, such as FTP for file transfers or SMTP, and
POP3 for e-mail. The device receives remote requests for these services at your
40