PLANET ADN-4100 - Manual (Page 31)

22
Field Description
 If you select 64 bits, you need to enter 10
hexadecimal numbers or 5 characters.
 If you select 128 bits, you need to enter 26
hexadecimal numbers or 13 characters.
Choose WEP Key
Select the WEP key from the drop-down list. Its value
range is 1—4.
WEP Keys 1—4
Set the 64 bits or 128 bits key, in the format of Hex or
ASCII.
Authentication
Select the authentication mode from the drop-down list.
You can select Open or Share Key.
Click Apply to save the settings.
Auto (WPA or WPA2)
If the Security Mode is set to Auto (WPA or WPA2), the page as shown in the
following figure appears: