PLANET ADN-4100 - Manual (Page 79)

3.3.10.9 PPTP
The Point-to-Point Tunneling Protocol (PPTP) is a method for implementing
virtual private networks. PPTP uses a control channel over TCP and a GRE
tunnel operating to encapsulate PPP packets.
In the NETWORK TOOLS page, click PPTP, the page as shown in the following
figure appears.
The following table describes the parameters in this page.
Field Description
Local IP Start The started IP address of the local network.
Local IP Num
The valid numbers of local IP addresses. It works
together with the Local IP Start to determine the range
of the local IP addresses.
Remote IP Start The started IP address of the remote network.
Remote IP Num
The valid numbers of remote IP addresses. It works
together with the Remote IP Start to determine the
range of the remote IP addresses.
Netmask It is valid for both the local network and the remote
70