PLANET ADN-4100 - Manual (Page 13)

4
Interface/Button Description
 Press the button and hold it for 3 or more than 3
seconds, to initialize WPS negotiation.
ON/OFF Power switch, power on or off the device.
1.3 System Requirements
Recommended system requirements are as follows:
 A 10Base-T/100Base-TX Ethernet card is installed on your PC.
 A hub or switch is available for connecting one Ethernet interface on the
device and several PCs.
 Operating system: Windows XP, Windows 2000, Windows ME, or Windows
98SE.
 Internet Explorer V5.0 or higher, Netscape V4.0 or higher, or Firefox 1.5 or
higher
1.4 Features
The device supports the following features:
 IEEE802.11b/g/n

Various line modes
 External PPPoE dial-up access
 Internal PPPoE and PPPoA dial-up access
 1483 Bridged, 1483 Routed, and MER access
 Multiple PVCs (up to eight) that can be isolated from each other
 A single PVC with multiple sessions
 Multiple PVCs with multiple sessions
 Binding of ports with PVCs
 802.1Q and and 802.1P protocol
 DHCP server
 NAT and NAPT
 Static routing
 Firmware upgrade through Web or TFTP
 Restore to the factory defaults