PLANET ADN-4100 - Manual (Page 41)

32
In the TIME AND DATE page, you can configure, update, and maintain the time
of the internal system clock. You can set the time zone that you are in and the
network time protocol (NTP) server. You can also set daylight saving time to
automatically adjust the time when needed.
Select Automatically synchronize with Internet time servers.
Select the appropriate time server and the time zone from the corresponding
drop-down lists.
Select Enable Daylight Saving if necessary. Enter the correct the start and end
time of the daylight saving.
Click Apply to save the settings.
3.2.7 Logout
Choose Setup > Logout. The page as shown in the following figure appears: