PLANET ADN-4100 - Manual (Page 46)

Field Description
WMM Advertise
Select whether to enable WMM. You can select Off or
On.
Max Clients
Set the maximum number of clients that can be
connected to the AP at the same time. Its value range
is 1—32.
SSID1—3
Enable Wireless
Guest Network
Select or deselect the check box to enable or disable
the wireless interface.
SSID Similar to the primary SSID, it identifies a wireless AP.
These settings are applicable only for more technically advanced users who have
sufficient knowledge about wireless LAN. Do not change these settings unless
you know the effect of changes on the device.
Click Apply to save the settings.
3.3.1.2 MAC Filtering
In the ADVANCED WIRELESS page, click MAC Filtering. The page as shown in
the following figure appears:
Click Add and the page as shown in the following figure appears:
37