PLANET ADN-4100 - Manual (Page 48)

Click Apply to save the settings.
3.3.1.4 WPS Settings
In the ADVANCED WIRELESS page, click WPS Setting. The WIRELESS WPS
page as shown in the following figure appears:
Enabled: The WPS service is enabled by default.
Note:
Ensure that the network card supports the WPS function.
Field Description
Select Mode Select Enrollee or Registrar from the drop-down list.
Configuration State
Select Configured or unconfigured from the
drop-down list.
Input Station PIN
If you are using the PIN method, you need a Registrar,
either an access point or a wireless router, to initiate the
registration between a new device and an active access
point or a wireless router.
39