PLANET VIP-360PT - Manual (Page 59)

NAT Configuration
Field name explanation
IPSec ALG It is an encryption technology. Select it to enable IPSec ALG, the default is
enable
FTP ALG FTP is a service of connection layer which can transform intranet IP into
extranet IP when intranet IP is sending out packet.
Select it to enable FTP ALG, the default is enable
PPTP ALG Select it enable PPTP ALG, the default is enable
Shows the NAT TCP mapping table
Shows the NAT UDP mapping table
Transfer Type Select the NAT mapping protocol style, TCP or UDP
Inside IP Set the IP address of device which is connected to LAN interface to do NAT
mapping.
Inside Port Set the LAN port of the NAT mapping
Outside Port Set the WAN port of the NAT mapping
Notice: After finish setting, click the Add button to add new mapping table; click the Delete button
to delete the selected mapping table.
Shows the outside WAN port IP address and the inside LAN port IP address.
Outside IP Set the outside Wan port IP address of DMZ.
Inside IP Set the inside LAN port IP address of DMZ
Click the Add button to add new table; click the Delete button to delete the selected mapping table.
Notice: 10M/100M adaptive means the network card, and other equipment physical consultations
speed, testing speed under bridge mode near to 100M, in order to ensure the quality of voice and
communications real-time performance, we made some sacrifices of NAT under the transmission
performance. T ransmit with full capability only when system is idle, so can not guarantee that the
transmission speed reach to 100M