PLANET VIP-360PT - Manual (Page 40)

Destination Set Destination address. This is optional config item. If you want to set
peer to peer call, please input destination IP address or domain name.
If you want to use this dial rule on SIP2 line, you need input
255.255.255.255 or 0.0.0.2 in it.SIP3 into 0.0.0.3
Port Set the Signal port, the default is 5060 for SIP.
Alias Set alias. This is optional config item. If you don’t set Alias, it will show
no alias.
Note: There are four types of aliases.
1) add: xxx, it means that you need dial xxx in front of phone number, which will reduce dialing number
length.
2) all: xxx, it means that xxx will replace some phone number.
3) del: It means that phone will delete the number with length appointed.
4) Rep: It means that phone will replace the number with length and number appointed.
You can refer to the following examples of different alias application to know more how to use different
aliases and this dial rule.
Call Mode Select different signal protocol, SIP or IAX2
Suffix Set suffix, this is optional config item. It will show no suffix if you don’t set it.
Delete Length Set delete length. This is optional config item. For example: if the delete length is
3, the phone will delete the first 3 digits then send out the rest digits. You can refer
to examples of different alias application to know how to set delete length.
Examples of different alias application
Set by web explanation example
You need set phone number,
Destination, Alias and Delete
Length.
Phone number is XXXT;
Destination is 255.255.255.255
(0.0.0.2) and Alias is del.
This means any phone No. that
starts with your set phone number
will be sent via SIP2 line after the
first several digits of your dialed
phone number are deleted
according to delete length.
If you dial “93333”,
the SIP2 server
will receive “3333”