PLANET VIP-360PT - Manual (Page 45)

1). End with “#”: dial your desired number, and then press #.
2). Fixed Length: the phone will intersect the number according to your specified length.
3). Time Out: After you stop dialing and waiting time out, system will send the number collected.
4). User defined: you can customize digital map rules to make dialing more flexible. It is realized by
defining the prefix of phone number and number length of dialing.
In order to keep some users' secondary dialing manner when dialing the external line with PBX, phone
can be added a special rule to realize it. So user can dial a number as external line prefix and get the
secondary dial tone to keep dial the external number. After finishing dialing, phone will send the prefix
and external number totally to the server.
For example, there is a rule 9, xxxxxxxx in the digital map table. After dialing 9, phone will send the
secondary dial tone, user may keep going dialing. After finished, phone will call the number which starts
with 9; actually the number sent out is 9-digit with 9.
Digital Map Configuration
Field name explanation
End with "#" Set Enable/Disable the phone ended with “#” dial.
Fixed Length Specify the Fixed Length of phone ending with.
Time out Set the timeout of the last dial digit. The call will be sent after timeout.
Below is user-defined digital map rule:
[] Specifies a range that will match digit. May be a range, a list of ranges separated by commas, or a list
of digits.
The “x” Match any single digit that is dialed.
The “.” Match any arbitrary number of digits including none.
“Tn” Indicates an additional time out period before digits are sent of n seconds in length. “n” is mandatory
and can have a value of 0 to 9 seconds. “Tn” must be the last 2 characters of a dial plan. If “Tn” is not
specified it is assumed to be T0 by default on all dial plans.