beautypg.com

PLANET VIP-360PT User Manual

Page 25

background image

QoS Configuration

Field name

explanation

VLAN Enable

Before select it to enable VLAN, you need enable Bridge mode in LAN config.

VLAN ID Check Enable Enable VLAN ID check by selecting it. After enable VLAN ID check, if VLAN

ID of a data package is not the same with the phones or a data package do

not have VLAN ID, the data package will be discarded.

Voice/Data VLAN

differentiated

After enable VLAN, system will set packets with different type of VLAN ID.

Undifferentiated means after using VLAN, both VoIP packets and other data

packets will use the voice VLAN ID; tag differentiated means after using

VLAN, VoIP(signal and voice) packets will add voice VLAN ID, and other data

packets will add data VLAN ID; data untagged means after using VLAN, only

VoIP packets will add voice VLAN ID. Other data packets will not use VLAN.

DiffServ Enable

Select it or not to Enable or disable DiffServ.

DiffServ Value

Set DiffServ value, the common value is 0x00.

Voice 802.1P Priority

Specify 802.1P Priority of voice/signal data package.

Data 802.1P Priority Set 802.1p of data VLAN. Non-VoIP data (such as http, telnet, ping etc) will

use this value to set VLAN package.

Voice VLAN ID

Set VLAN ID of voice/signal data package.

Data VLAN ID

Set 802.1q of data VLAN ID. Non-VoIP data (such as http, telnet, ping etc)

will use this value to set VLAN package.

Notice

1)Startup VLAN, if set Voice/Data VLAN differentiated as Undifferentiated, all packets will use the Voice

VLAN ID as the tag.

2) Startup VLAN, if set Voice/Data VLAN differentiated as tag differentiated and disables the DiffServ,

then system will not distinguish the voice and data, all packets will use the Voice VLAN ID as the tag.

3) Startup VLAN, if set Voice/Data VLAN differentiated as tag differentiated and enables the DiffServ,

then system will distinguish the voice and data and add the VLAN ID each other.

4) Startup VLAN, if set Voice/Data VLAN differentiated as data untagged, then the packet of the

signal/voice will use the Voice VLAN ID as the tag, but the data packets will not take the VLAN tag.