PLANET NVR-1620 - Manual (Page 78)

Network Video Recorder with HDMI
NVR‐820 / NVR‐1620
*Only connected cameras will be displayed in the list.
*Some cameras only allow one trigger source to be configured at a
time, e.g.,
If the camera has the motion detection function turned on, its digital
input will be disabled and vice versa. Under such circumstance, if
you set to use camera’s digital input port as the event trigger
source, you will not be able to select motion detection as the trigger
source for this camera under “Event Configurations” >> “Event
Trigger” setup page.
• The image(s) that are uploaded to the destined FTP server or
emailed to a destined mail recipient are in their own
proprietary image file format (.h4i or .p4i), which can only be
opened by the NVR media player.
.h4i if event was recorded in H.264, .p4i if event was recorded in
MPEG4. .jpg if event was recorded in MJPEG.
9.3 Event Servers
9.3.1 Configuring an FTP Server
Event servers are to be used with event trigger actions. In case of unusual
motion detected by the camera or a disk failure, the recorder can send
notification with the acceptable format (image/txt) to a destined event server
according to the configuration.
78